Glock Slide Optic Cut
Prepare your Glock for Optics
This service mills out your Glock slide to accept a reflex sight.
We do not cut M.O.S, 17L, and 42/44 slides for optics
RMR, RMSc / K Cut, and Deltapoint all use #6-32 Torx screws
RMRcc uses #5-40 hex head screws
M.O.S. Cut uses M3x0.5 Torx screws
For ACRO and MPS cuts, we recommend moving the iron sights in front of the optic. This allows us to cut the footprint deeper and closer to the bore axis.
If 'None' is selected for refinishing, you are understanding that your optic cut will rust and corrode, especially in a high humidity environment.
Cerakote is for the entire slide.
We will apply cold blue only to the cut portion of the slide. Some aftermarket slides will not cold blue.
Feel free to drop off or ship the slide to us. We will accept it assembled or disassembled. The frame is not required for this service. Included optics and sights will be installed and aligned.
For 1/3 cowitness sights:
For Full cowitness sights:
We do not cut M.O.S, 17L, and 42/44 slides for optics
RMR, RMSc / K Cut, and Deltapoint all use #6-32 Torx screws
RMRcc uses #5-40 hex head screws
M.O.S. Cut uses M3x0.5 Torx screws
For ACRO and MPS cuts, we recommend moving the iron sights in front of the optic. This allows us to cut the footprint deeper and closer to the bore axis.
If 'None' is selected for refinishing, you are understanding that your optic cut will rust and corrode, especially in a high humidity environment.
Cerakote is for the entire slide.
We will apply cold blue only to the cut portion of the slide. Some aftermarket slides will not cold blue.
Feel free to drop off or ship the slide to us. We will accept it assembled or disassembled. The frame is not required for this service. Included optics and sights will be installed and aligned.
For 1/3 cowitness sights:
For Full cowitness sights: